Cycle Terminal
OEM Style Japanese Motorcycle Electrical Connectors, Wiring Harness Connectors
View Cart
Sealed and Non-Sealed Connectors
We have Vintage and modern Sport-bike Motorcycle Wiring Harness electrical Connectors,
these Connectors are purchase directly from the manufacturer, And in many cases the
OEM Supplier, The terminals and connectors are superior quality. Most are Manufactured
in the USA, Japan, or Europe.
Bullet Connectors, Yazaki, Sumitomo, JAE, Hitachi, 6.3mm - .250, 2.8mm - .110, 2.3mm
- .090,
Connector Sets with terminals, Mini Relay Connectors, Voltage Regulator-Rectifier
Connector for Honda,
H4 Headlight connector and couplers.
Keep checking back for links on How to’s, Wiring Diagrams, and other great information.
If you have any Questions, click on the link to Email Here
What's the Difference between the Male and Female Connectors?
Male half of the connector is the side that the male terminals fit into.
Female Half of the connector is the side the female terminals fit into.
There is a MINIMUM ORDER of $5.00 on order total.
CDI Connector
This connector takes one 2 pin female
Connector, and one 4 pin female connector.
This is what you will need if you have
a bad solder joints, or burnt connector
for your CDI unit.
This connector will allow you to
recondition your old CDI unit, and will
need to be soldered.
$12.95 Each 090-DC CDI
Add to Cart
4 Pin SMDC-090
CDI Connector
Terminals and
Wire Seals Included
$3.25 each
Add to Cart
2 Pin SMDC-090
CDI Connector
Terminals and
Wire Seals Included
$2.45 each
Add to Cart
Honda Regulator/Rectifier Connector
5P250-312 $7.95 each
This connector has a combo of two large .312 terminals on the bottom, and three
smaller .250 terminals across the top.
This Connector is used on Honda Shadow Models, CB Models, CBR Models, NT, VF, XL
and many others.
Add to Cart
Extra Female Terminals
For SMDC 090
$0.25 each
Add to Cart
Sumitomo Motorcycle Starter Solenoid Connectors and Main Fuse Cover
A Special connector For most Honda, Yamaha, some Kawasaki, and Suzuki.
It has the Connector lock built into the Main Fuse cover.
These were very hard to find, and had a high cost.
These come with 4 terminals.
4 x.250 locking terminals for 14-18 gauge wire.
Solenoid Connectors can be found Here
JAE MX1900
One of the smallest waterproof
Connectors available.
About Me
Kits
Crimp tools
Terminals
Relay kits
Relays
Shipping
Fuse box's
Tubing
Fuses
New Items
Home
Motorcycle Harness Connector covers
Another tough one to source.
These are the Same covers sold by Web Bike Japan.
These soft PVC covers can be found at the ends of the wiring harness or harness break-outs.
Connector Covers