Cycle Terminal

OEM ECU-ECM-PCM-ICM-CDI Electrical Connectors

ECU, ECM, PCM, PGMFI, ICM, CDI Control unit connectors.

Furukawa RFW-RFP, AMP Superseal 1.0, for Kawasaki, Honda, Suzuki, Yamaha, and Hyundai

Nice selection of the most common JAE MX23A series sealed connectors,

commonly found on Some  Yamaha Raod Star, Suzuki and the Kawasaki ZX6-ZX10,  and  Performance Electronics PCM-ECM-ECU - Programmed Fuel Injection Control units.

JAE MX23A Female connector 34 pin

For Some PCM-ECM-ECU and electronic control units used by

Suzuki GSXR, 05 up Kawasaki ZX6R, Performance Electronics PE3,

Hyundai Genesis, and others.
Please compare photo with what you have and need.

Made in Japan

Economy  - Micro Open Barrel Crimp Tool

For JAE 040, Metri-pack GT150, Sumitomo 090 - 040 Terminals, Insulation and Wire Seals 16 - 30 AWG  

Made in USA by Rostra

I have used this and  you can get factory quality crimps with it. This tool does the wire crimp, then the insulation or wire seal crimps in 2 steps.

If your not doing this type of crimping all the time, great tool to add to your box, and you cant beat the price. Pick up a few extra terminals to practice with.

These will not do Bullet terminals, or 110, 250 standard terminals      

                                                          $33.95 each   ECT47

JAE MX23A Female connector 36 pin

Altrenate Keying - Gray housing

For Some PCM-ECM-ECU and electronic control units used by

Some Yamaha Road Star, Suzuki GSXR, 05 up Kawasaki ZX6R,

Performance Electronics PE3 and others.
Made in Japan

Honda ECU/ECM Sumitomo 33 pin Connector

For Some PCM-ECM-ECU and electronic control units

Comes complete with 20 - 22 awg terminals

Wire seals incorporated into the housing, Front and Rear Caps

     Honda 33 pin ECM/ECM connector

Some Applications include

Some 2011-2013 CBR250 ecu/ecm connector

Some 2007-2013 CBR600 - ecu/ecm connector

Some 2006-2011 CBR1000 - ecu/ecm connector

Some Late model CRF250 -ecu/ecm connectors

Some 2009-2014 CRF450 - ecu/ecm connectors

Some 2010-2013 VT750  - ecu/ecm connector

Some 2010-2013 VT1300 - ecu/ecm connector

Honda ICM/ECU/ECM 22 pin Connector

For Some ICM-CDI-ECM-ECU control units

   Honda 22 Pin ICM Connector

Some Applications include

Some 2003-2007 VTX1300

Some 2002-2008 VTX1800C

Some 1998-2008 VT1100

Some VT750

2004-2007 VT600

1998-2001 VFR
2000-2001 RC51
1999-2000 CBR600

2004 CBR600F4i

Honda ICM 16 pin Connector

For Some ICM-CDI Electronic ignition control units

   Honda 16 Pin ICM Connector

Some Applications include

Some 1998-2000 VT1100

1998-2003 VT750 ACE

2004-2007 VT600

Some older CBR600

FW-090 Series Furukawa Connectors

and FP-090 series Kawasaki, Yamaha CDI Headers in

4 pin, 6 pin, 8 pin, and 16 pin

                        RFW and FP ICM-CDI Connectors are here

Commonly found on Kawasaki CDI’s

Amp 1.0 Superseal ECU/ECM Connectors

Comes complete with 20 - 22 awg terminals

Wire seal incorporated into the housing

             Superseal 1.0 Series ECU Connectors

Some applications include:

Ducati Instrument Cluster Connector

GSXR1300 Hayabusa ECU (99'-07')

YZF-R1 ECU (07'-08')

YZF-R6 ECU (06'-14')

ZX-10R ECU (04'-05')

DTAfast ECU's: S60, S80, S100

Haltech ECU's

AEM ECU,s

Link ECU's

Motec ECU M84, M400, M600, M800, and M1 series ECU M130, M142, M150

Motec Power Distribution Module's: PDM15, PDM30

Motec Expansion box E888

Motec Dash CDL3

Motec Dash C125