Cycle Terminal

OEM Style Vintage Japanese Rubber Headlight and CDI Connector s  

Vintage Japanese 2 and 3 way Rubber Connectors.

Discontinued for years, KDI reproductions in California has re-manufactured these hard to find connectors.

These rubber connectors are fitted with 3.9mm - 4mm Japanese type bullet terminals, and were used extensively by Kawasaki, Suzuki, and Yamaha in the 70's, and can be found on some later Hondas, and even CCM machines. These were primarily used for headlight and CDI connectors.

Do not confuse these with SAE type trailer connectors, which have 4.7mm bullet terminals and are not compatible.

Great Pricing, and Cheap Shipping!!

2 pin Vintage Rubber Connectors - with 3.9mm Terminals

Terminals Fit wire size .75 - 2 mm (14-18 AWG)

This connector set comes as a set with 3 male and 3 female terminals.

These must be properly crimped to fit in the connector.

These are black in color, due to the lighting they appear gray in the photo.

No stock,  if you need these 2 pin connectors please go to www.vintageconnetions.com

3 pin Vintage Rubber Connectors - with 3.9mm Terminals

Terminals Fit wire size .75 - 2 mm (14-18 AWG)

This connector set comes as a set with 4 male and 4 female terminals.

These are black in color, due to the lighting they appear gray in the photo.

These must be properly crimped to fit in the connector.

No stock,  if you need these 2 pin connectors please go to

www.vintageconnetions.com