Cycle Terminal
OEM Style Japanese Wiring Harness Sleeve, Tubing and Loom,
Sumitube Dual Wall Adhesive Lined Shrink Tube, Electrical Tape
I have Wiring Harness Tubing, Sheathing, and Sleeving to give your bike a clean finished
looking Restoration or Repair. Soft Flexible High temp -
Braided expandable sleeving if your going for a custom look
Great prices and low shipping cost. Sold by the Foot!!
3M Temflex 1700, and Super 33+ Electrical Tape, Non-
3M Temflex 1700 -
A good easy to use, flexible electrical tape, Great adhesion.
for General Harness applications where High temp is not needed.
Front and Rear fenders, Main Harness, Lighting, Handle Bar.
3M Super 33+ -
Better for High temp area’s around the engine
Comes in a plastic case.
Non-
Black in color -
Dry Vinyl Harness-
NON-
Wiring Harness Sleeve, Tubing, Sheathing, Loom
Dual Wall -
Seal those crimps, and solder joints with a hot melt adhesive lining as you shrink it.
High Quality Made in the USA or Japan, 5 sizes and 2 colors available.
Great Stuff, wouldn't think about using anything else but one of these two brands.
DSG Canusa -
Sold in 6 inch pieces -
4.7 mm (3/16) $1.10 each 6” Black DW4mm
seal Mini Posi-
4.7 mm (3/16) $1.15 each 6” Red DW4mm
6 mm (1/4) $1.30 each 6” Black DW6mm
Battery terminal crimps, splice crimps
6 mm (1/4) $1.35 each 6” Red DW6mm
10 mm (3/8) $1.60 each 6” Black DW10mm
12 mm (1/2) $1.90 each 6” Black DW12mm
19 mm (3/4) $2.35 each 6” Black DW19mm
Made in Japan -
This has the thickest hot melt adhesive that you have ever seen, It will encapsulate anything you use it on.
Great Stuff!!
Sold in 6 inch pieces -
4mm -
4 mm $1.40 each 6” Black Sumitube 4mm
Seal small terminal crimps and small splices
6mm -
6 mm $1.50 each 6” Black Sumitube 6mm
Seal Battery terminal crimps
9mm -
9 mm $1.65 each 6” Black Sumitube 9mm
9mm original inside diameter -
Thick adhesive lining
12mm -
12 mm $2.05 each 6” Black Sumitube 12mm
Seal Large Battery terminal crimps
12mm original inside diameter -
Thick adhesive lining
Electrical Tape
Sumitube and DSG -
There is a MINIMUM ORDER of $5.00 on order total.
High Temp Wiring Harness Tubing
Soft, Flexible, High temp Protection -
This tubing has a little shine to it, printed specs.
This is the same tubing that you will find on Modern Motorcycle and automotive
Fuel injector and engine harnesses. The best stuff I have found Available.
Its all I have been using for about a year now.
It took me sometime to get the larger sizes together.Very flexible, resistant to heat, UV, Mold, Fungus. Great stuff, manufactured to the highest standards.
Very consistent from one run to the next, sold by the foot.
When adding to cart, Quantity of 1 = 1 foot Quantity of 3 = 3 feet
In 20 Foot lengths max-
Measured using round inside diameter!!
4.5 mm (11/64) $0.80 per foot VW-
5 mm (3/16) $0.95 per foot VW-
6.5 mm (1/4) $1.25 per foot VW-
8 mm (5/16) $1.40 per foot VW-
9.5 mm (3/8) $1.65 per foot VW-
11 mm (7/16) $1.80 per foot VW-
14 mm (9/16) $1.95 per foot VW-
16 mm (5/8) $2.25 per foot VW-
19 mm (3/4) $2.75 per foot VW-
Specs UL/CSA: 105°C VW-
SIZE Inside Diameter (m/m) Wall Thickness (m/m) Outside Diameter (m/m)
4 4.2 mm .55 mm 5.3 mm
5 5.3 mm .55 mm 6.4 mm
6 6.6 mm .55 mm 7.7 mm
8 7.9 mm .70 mm 9.3 mm
10 9.5 mm .70 mm 10.9 mm
11 11.1 mm .70 mm 12.5 mm
14 14.2 mm .70 mm 15.6 mm
16 16.0 mm .70 mm 17.4 mm
19 19.0 mm .70 mm 20.4 mm
Keep checking back for links on How to’s, Wiring Diagrams, and other great information.
If you have any questions please feel free to Email me here